Pro Connected Smart Accessible Control Unit, Battery Powered

The Accessible Control Unit does not require an internet connection to work, but instead communicates with your Pro Connected Smoke, Heat and CO alarms via a secure radio frequency.
The only time you would require an internet connection with the FireAngel Pro Connected product range is when you are adding a Gateway and the FireAngel Connected App in to the network. This will enable push notifications to your phone or other smart devices, but if your internet supply fails the alarms will still function within the home and alert you to danger.

When alarms are interlinked they will all mirror the alert of the device which detects the danger or requires attention. When all of the alarms are alerting you can press the central test button on any of the alarms in the system to silence all alarms, except the alarm which has detected danger or needs further investigation.
In a network containing both smoke/kitchen heat alarms and carbon monoxide alarms, the alert style will tell you whether the danger is fire or carbon monoxide related. For smoke/fire detection the system will alarm with three beeps (beep – beep – beep) and if Carbon Monoxide is detected there will be four beeps (beep – beep – beep – beep).
If a Gateway is added to the network you can also check any push notifications or The App dashboard to see which device requires your attention.

When alarms are interlinked they are able to communicate and will alert at the same time if one of the alarms detects danger. In the case of wireless interlink, this communication is in the form of protected radio frequency, which means there’s no need to run cables between the alarms. The FireAngel Pro Connected alarms allow the network to be extended to include devices across your entire home. For example, a network of 7 x smoke alarms, 3 x heat alarms, 3 x carbon monoxide alarms and a Gateway will be completely secure and protect your whole home, and are backwards compatible with the FireAngel Wi‑Safe2 range.

You can also add a Gateway into the network which will allow you to receive updates on the network when you’re away from the home. The Gateway will communicate with the FireAngel Connected App using your home’s internet connection, but if this fails or cuts out the alarms will still protect your home, but you won’t receive a push notification.

The Alarm Control Unit is not part of a network. Please refer to the ‘Wireless Interlink’ section of the manual to ‘learn‑in’ the control unit to the network.

This indicates that one of the alarms has previously been activated. Please refer to the ‘Locate’ section of this manual.

An alarm on the network has developed a fault. Please refer to the ‘Fault Detection’ section of the manual.